M/s. Crane Australia Pty. Ltd. Crane Cast Steel Gate, Globe & check Valves.
Crane pressure Seal Gate, Globe & check Valves & Y Type Globe & Check Valves (2" & above & Pressure Class up

 
M/s Crane Stockham Ltd, U.K. The innovative dual-plate design is generally stronger, lighter and smaller than conventional flanged Swing Check valves and comes in a wide variety of cast materials for bodies, plates and for all types of service and temperature conditions. More...

M/s OMB Valves OMB Forged Steel Valves division manufactures gate, globe and check valves for the hydrocarbons and chemical processing plants. More...

M/s Galli & CassinaGalli & Cassina is a prominent Italian Company mainly involved in the manufacture of a complete range of Lubricated Plug Valves. It is located in Solaro near to Milano, More...

M/s Daily Thermetrics Corporation, USA Daily Thermetrics has been providing temperature instrumentation to Indstry since 1972. We are known for our quality product, service, and engineering.More..

M/s. J.B. Systems, England J.B. Systems Ltd. is a manufacturing company situated in England and established in 1996. More..


M/s PROTEGO Equipment Pvt. Ltd. PROTEGO products are developed and tested at our own test facilities in Braunschweig, Germany.More...

 

 

 

 

 

 

 

 

 

 

 

 

 

Our common introduction for all products represented by us in our introduction letter
can be viewed by
INDIVIDUAL PRODUCT INTRODUCTION OF OUR RESPECTIVE PRINCIPALS ARE AS FOLLOWS:-

 

Tel.:25261105, 25271752
Fax:0091-11-25271752, 25259628
E-Mail: ra@msintl.info
msi@del3.vsnl.net.in
Website: www.msintl.info

Download the Introduction

Download Company Profile

MARKETING SERVICES INTERNATIONAL
203, Pushpa Plaza, 2nd Floor, Commercial Complex, Opp. Jwala Heri Market, Near Paschim Vihar Post Office, Paschim Vihar, New Delhi – 110063 (India)

REQUEST FOR REGISTRATION FOR SUPPLY OF VARIOUS PRODUCTS OF OUR FOREIGN PRINCIPALS

We would like to introduce ourselves as one of the reputed marketing companies in India.

We would like to inform you that we are marketing the following products in India on behalf of our principals as per the details etc given below:



1. M/s. CRANE AUSTRALIA PTY. LTD AUSTRALIA
(A Division of CRANE Co., USA)

CRANE Make
GATE, GLOBE & CHECK VALVES
VARIOUS MOCs I.E. CAST STEEL/STAINLESS STEEL/ALLOY STEEL/DUPLEX, ETC
PRESSURE RANGE 150# TO 2500#SIZE 2” TO 48” , CAN BE SUPPLIED WITH GEAR OPERATED & ACTUATION VALVES.

Crane
Flowseal High Performance Buttefly valves are available in size from 2” – 48” IN ASME pressure classes 150, 300 and 600 and are available with diverse range of activation options.


Flowseal Ms Triple offset valves, sizes from 3” to 24” ASME class 150, 600, Temp range of 320 o to 1000o carbon steel, stainless and high alloys.


2. M/s. CRANE STOCKHAM VALVE LTD
NORTHERN IRELAND, UK.
(A Division of CRANE Co., USA)

Range CRANE-STOCKHAM Make
DUO-CHECK II DUAL PLATE CHECK VALVE
COMPAC-NOZ HIGH PERFORMANCE NON SLAM CHECK VALVE
NOZ-CHECK HIGH PERFORMANCE
NON SLAM CHECK VALVE
SIZE 2” TO 72”(150# TO 2500#)

3. M/s LVF S.P.A

Range
(A) FORGED STRAIGHT WELDED BONNET
HIGH PRESSURE GATE, GLOBE & CHECK VALVES AND BELLOW SEAL VALVES
FORGED Y TYPE GLOBE, BELLOWS & CHECK
VALVES
THROUGH CONDUIT GATE VALVES
SIZE RANGE - 1/2" TO 4"(FROM 150# TO 4500#)
VARIOUS MOCs (i.e. CS, AS i.e. F11, F22, F91, SS, MONEL, ETC.)
ENDS: SE, SWE, BWE & FE
- SPECIAL SERVICE VALVES FOR HYDROGEN, OXYGEN, VACUUM, CHLORINE & ALKYLATION ALSO AVAILABLE.

B) BALL VALVES (FLOATING TRUNNION, TOPENTRY & FULLY WELDED)
SIZE RANGE 1-1/2"TO 56" (FROM 150# TO 2500#)
VARIOUS MOCs (i.e. CS, AS, SS, MONEL, LF3, ETC)
TEMP. RANGE CRYOGENIC TO+260º C


4. M/S. GALI&CASSINA S.P.A ITALY

MANUFACTURE OFLUBRICATED PLUG VALVES PRESSURE BALANCE TYPE
FROM ANSI CLASS 150 TO 2500 (PN20 TO PN 420)
SIZE RANGE 1/2" TO 36"
IN SHORT, REGULAR AND VENTURI PALTER ALSO PRESSURE BALANCE PLUG VALVES
(API 6A 2000-3000-5000-10000)
FROM 2 1/16" TO 7 1/16" (DN 52 TO 179)

FULL BORE PRESSURE BALANCED TYPE WITH LGC LUBRICATION SYSTEM
API 6D PLUG VALVES
FROM ANSI 600 / PN 100 TO ANSI 2500/PN420
RF & BW/RTJ ---- RF/ BW/RTJ
SINE RANGE:- 1" TO 24" (DN 25 TO DN 600)
API 6A PLUG VALVES
FROM API 2000/PN 138 TO API 10000/PN 690
RF & BW/RTJ ----- RTJ & BW
SIZNE RANGE:- 1 13/16" TO 7 1/16"

MATERIAL OF CONSTRUCTION CA BE OFFERED IN CARBON STEEL, STAINLESS STEEL, DUPLEX, SUPER DUPLEX, NCHOL MONEL , TITANIUM, LCB, LCC, ETC.


5. M/S Crystal Industrial Syndicate Pvt. Ltd.

Injection Quills are special purpose products, Used widely in Petroleum Industry for Treatment, Mixing and Neutralizing of Process Products.


Scrubber System are globally used in industries for treatment for exhaust/vent gases are an effective method in prevention of Air Pollution

 


6. M/S. DAILY THERMETRICS
CORPORATION , USA

 

CAT TRACKER- CATALYST  TRACKING  SYSTEM  THERMO COUPLES THERMOWELLS  
RTD – RESISTANCE TEMPERATURE  DETECTORS PIPEWELL MULTIPOINTS

 


7. M/S. J. B. SYSTEMS LTD.,
ENGLAND

 

Range
FLAME MONITORING & IGNITION
SYSTEMS OF IRIS MAKE SUPPLIED
DIRECTLY OR THROUGH OEMs OF
BURNERS, PROCESS HEATERS, UTILITY
BOILERS, ETC. AND OEMS LIKE JOHN
ZINC COMPANY, NATIONAL POWER,
HAMWORTHY, COMBUSTION, ETC.

 

8. M/S. PROTEGO EQUIPMENT PVT. LIMITED, MUMBAI

 

MANUFACTURERS OF  FLAME ARRESTERS PRESSURE/VACCUM VALVES
EMERGENCY VALVES FOR SAFETY AND ENVIRONMENTAL PROTECTION   

 

Also attached details of above products with photograph & size range.

Please note that our above principals have got experience in the field of Refineries, Petrochemicals, Oil & Gas Platforms, Fertilisers & Power Plants, etc. Worldwide and are ISO 9000 approved and have approvals from all major leading consultants including EIL from India. Major customers are:

EIL, BECHTEL, FLUORO DANIEL, JOHN BROWN, TOYO ENGG.  UDHE, JACOBS H & G, KVAERNER, LURGI, IOCL, BPCL, HPCL, MRPL, BRPL, NRL, IPCL, GAIL, ONGC, RELIANCE INDUSTRIES LTD., RELIANCE PETROLEUM LTD., BHEL, SAIL, BOC, PARAXAIR, L & T, KTI, TECHNIP, TECNIMONT, AIR LIQUIDE, DAELIM, SAMSUNG, LG, SHELL, BRITISH GAS, AND MANY MORE…

We shall be extremely obliged if you kindly favour us with your valued enquiries for the above products on behalf of our principals, which will receive our prompt attention always.

In case you need any further information / clarification kindly write to us for what you will get prompt attention.

Thanking you and looking forward to receive your most favourable reply soon.

Very truly yours,
For MARKETING SERVICES INTERNATIONAL

RAKESH AHLUWALIA
(Managing Director)                                                                                                                             

 

 
 
Copyright © 2006, Marketing Services International. All rights reserved.
ABOUT US - INTRODUCTION - PRODUCTS - PLUS POINT - SERVICES - OUR MISSION - OUR VISION - OUR CUSTOMERS - WHAT'S NEW - CONTACT US